Twice-a-year HVAC maintenance for New Orleans homes
A system that runs eight months a year needs looking after twice a year. The plan puts a spring cooling visit and a fall heating visit on the calendar for you, and moves you to the front of the line when something breaks.
Answered 24/7Mid-City service officeSlidell head officeEvery major brand
An HVAC maintenance plan in New Orleans covers two scheduled visits a year: a spring cooling tune-up before daily AC use starts, and a fall heating check before the first cold front. Plan members get priority scheduling on repair calls. It suits homeowners who forget tune-ups, landlords with several units, and anyone with an older system.
Why two visits a year, not one
Updated September 2026
Cooling and heating fail for different reasons. In spring the drain, coils, capacitor and charge matter most. In fall it is the furnace burners, flame sensor, heat strips, heat pump defrost and carbon monoxide safety. One annual visit covers one season and leaves the other to chance.
The plan exists so nobody has to remember. We call to schedule, keep a record of each system, and track the parts that are wearing so a small repair can be planned instead of becoming a July emergency.
What each plan visit covers
- Condensate drain flushed and pan treated
- Coils inspected and outdoor coil cleaned
- Capacitor, contactor and connections tested
- Refrigerant charge and airflow measured
- Burners, flame sensor and heat exchanger checked
- Carbon monoxide test on gas systems
- Heat strips and heat pump defrost tested
What a humid climate does between visits
Humidity is the reason maintenance matters more here than in most of the country. Condensate drains grow algae through a long, wet cooling season, and coils freeze when a clogged filter cuts airflow. Both failures develop slowly and show up suddenly, usually as water through a ceiling or ice on the lines on the hottest afternoon. A spring drain flush and a mid-season filter check prevent most of them.
Twice-Yearly Visits
The spring visit is a full cooling tune-up: outdoor coil cleaning, drain flush and pan treatment, capacitor and contactor tests, electrical connections, refrigerant charge and airflow. The fall visit covers heating: burners, igniter and flame sensor on gas furnaces, heat exchanger and flue inspection, carbon monoxide check, heat strip and sequencer test, and the heat pump's defrost cycle. Each visit ends with a short written note on the system's condition and anything worth watching, so the next visit starts from what the last one found.
Priority Scheduling
When a plan member calls with a breakdown, the call moves ahead of non-plan work of the same urgency. That matters most in the first heat wave of the year, when every company in the metro is booked out. Priority does not change how emergencies are triaged, since a household with a vulnerable person still comes first, but among routine repairs, plan members are seen sooner. It is the main reason landlords sign up, since a tenant without cooling is a call that cannot wait long.
What a Visit Covers
Every visit follows the same checklist so nothing is skipped, and the findings are kept on file for your system. We note the capacitor readings, charge, temperature drop and drain condition each time, which shows trends a single visit would miss: a capacitor losing capacity year over year or a charge slowly dropping from a small leak. Filters are checked and replaced if you keep a supply on hand. Repairs found during a visit are quoted, never done without your approval.
Single tune-up or a maintenance plan
| Single tune-up | Maintenance plan | |
|---|---|---|
| Visits per year | One, when you call | Two, scheduled for you |
| Seasons covered | One | Cooling and heating |
| Priority on repairs | No | Yes |
| System records kept | That visit only | Every visit, tracked |
What affects the cost of a maintenance plan
Plan pricing depends on the systems we are looking after; we quote it when you sign up.
Number of systems
Each additional system adds visit time.
System type
Gas furnaces need combustion checks; heat pumps need defrost testing.
Access
Attic and rooftop equipment takes longer.
Filters
Supplying filters at each visit adds a small cost.
Properties
Landlords with several addresses can bundle them.
Repairs found
Quoted separately and only done with approval.
How the plan works
- 1
Sign up
We record each system's make, model, age and location.
- 2
First visit
Scheduled for the upcoming season.
- 3
Reminder and scheduling
We call before each season to book the next visit.
- 4
Visit and notes
Checklist completed and findings recorded.
- 5
Priority on repairs
Plan members move ahead on routine repair calls.
- 6
Yearly review
Trends and upcoming replacements discussed plainly.
Questions about HVAC Maintenance Plan in New Orleans
A spring cooling tune-up, a fall heating check, a written note after each visit, and priority scheduling on repairs.
No. The plan runs year to year and you can stop before renewal.
No. Repairs are quoted separately and only done with your approval.
Yes. New systems still need drains cleared and coils cleaned, and some warranties expect maintenance.
Yes. Several addresses and systems can be combined on one plan.
Spring for cooling, before daily use, and fall for heating, before the first cold front.
Call any hour. Plan members get priority on routine repairs.
Yes. Readings and findings from each visit are kept on file.
More maintenance & commercial we handle in New Orleans
HVAC Surge Protector Installation
Outdoor Unit Surge Protection, air handler and control protection and more.
Our HVAC surge protector installation serviceMake-Up Air & Kitchen Ventilation
Make-up air unit service, negative pressure problems and more.
Make-Up Air & Kitchen Ventilation in New OrleansWant maintenance handled for you?
Call to set up a plan and book your next seasonal visit.
Browse every service